Acerax provides bespoke Cantilever Racking solutions for your warehousing needs. Cantilever racking creates space making solutions for goods or materials that are not suitable for adjustable pallet racking. Typically, this is because they are lengthy and need to overhang the basic bay structure e.g. Timber Boards, Steel Pipework, Cars and Boats.
Mechanically Loaded Cantilever Racking
Mechanically loaded Cantilever Racking (using a Fork Lift Truck) is likely to be a bespoke designed structure that will need careful consideration of the proposed stock profile and the environment the equipment is to be used in. It will either be a single-entry rack where the loaded items can be used on one side of the rack or double entry rack for both sides. Single entry racks will often be abutted to the inside wall or on a perimeter fence.
Like adjustable pallet racking, the arms on the rack can be adjusted on normally 150mm centres or can be welded into a fixed position. We design systems that are tailored to meet the needs of the business and the equipment held so that engineering requirements and standards are met.
Cantilever Racking is very often installed in an outdoors environment and will be finished in a galvanised format for durability. Sometimes the design of the structure will include protection from the elements, and this can take the appearance of a top fitted canopy to side, back cladding or even a building structure that encases the whole of the rack.
The structure is modulated and delivered in ‘flat pack’ format. We can provide SEIRS registered installers with experience of installing Cantilever Racking to ensure safety standards are met.
Hand Loaded Cantilever Racking
Hand Loaded Cantilever Racking is designed to provide space making solutions for lengthy items of equipment that do not need to be stored at height and are light enough for one or two persons to load and pick from. This supports the separation of stock specifications and enhances stock control and access to equipment.
These racks can also be sourced in a modulated format with variations to single and double entry access along with load variations. Adjust-ability of the arms are available on 75mm centres. Delivery on this equipment has a five-day lead time, subject to stock at the time of order. See full details in our online shop.
Arrange a Site Visit
If you would like to arrange a site visit or have any questions about our services, call us on 01952 641004, 0121 403 1609 or 0203 697 8478.
Cantilever Racking Project Planning & Installation
Whether you're looking for a new fit out or making additions to an existing site, ACERAX can help with your project planning and installation.Enquire Now