Home »
Departments »
Steel Partitioning

Steel Partitioning

Superb single skin, double skin and office partitioning designed, manufactured and fitted to our exacting standards. An ideal solution where a high quality, economical partitioning system is required for manufacturing and storage areas.

Steel Partitioning

Single Skin Partitioning

Specification

Panels are constructed from 43 x 43 x 1.2mm (18g) cold-rolled angles and 32 x 32 x 0.7mm (22g) cold-rolled 'T'-bards with 0.8mm (21g) CR4 mild steel of 50 x 50 x 3mm (10g) weldmesh sheets, spot-welded into the framework.

Standard Panel Size

Height:	2400mm, 2700mm, 3000mm
Width:	1000mm
Dado Height:	1200mm
Thickness:	43mm

A range of infill and special size panels can be supplied to maintain final dimensions.

Mullion Sizes

50 x 50 x 2.5mm	- up to 2700mm high
80 x 40 x 2.5mm	- 2700mm and above
100 x 50 x 3.0mm	- to suit installations

All two-way (intermediate) mullions have base plates for floor fixing. Knee braces and/or ladder mullions may be fitted for extra stability and strength, e.g. on clear access doors.

Standard Door Module Sizes

Side Hung Doors:	Height 2022mm Width 1000mm
Double Doors:	Height 2022mm Width 1940mm
Sliding Doors:	To suit your requirements

Doors can be supplied with or without vision panels. A full range of door types i.e. full height leaves, clear access modules or hospital type leaves are available to order.

Glazing

A two-piece glazing system that can accommodate 4 mm to 6.4 mm glass, is supplied in 1828 mm and 2440 mm lengths to be cut and fitted on site. 6 mm toughened, 6.4 mm laminated and 6 mm Pyroshield are supplied as standard. However, other types of glass and Perspex may also be fitted as required.

Paint Finish

All panels are electrostatically powder-coated in the following standard colours: Grey 10 A 07, Grey 00 A 05, Sandstone 08 B 17 and Stone 10 B 17. Special colours (over 100 in stock) are available at extra cost.